How to remove oven door and inner glass for cleaning
This Guide explains how to safely remove the oven door and inner glass panels on your Samsung oven, for cleaning away grease and food residue, and correctly refit the glass and oven door. The removal processes vary depending on your Samsung oven model, please look at your model specific user manual for the correct instruction and safety precautions before starting.
How to remove the oven door:
Switch off the oven and allow it to cool completely before removing the door or cleaning the glass.
CAUTION: The oven door is heavy; please ensure you can support the weight before removing.
Step 1: Open the oven door fully. Flip open the clips at both hinges completely.
Step 2: Partly close the door by approximately 70 degrees, with both hands, hold the sides of the oven door, pull and lift the door until the hinges can be taken out.
Step 3: Place the door on to a cushioned surface (e.g. A soft tea towel).
Door Glass Removal:
The steps below describe a door with three removable glass panels. Please check your user manual to confirm which panels can be removed before starting the cleaning process. How to find User Manuals and Software Guides. Keep track of each panel’s position and which way it faces so you can refit it correctly.
Step 1: Remove the two screws, one on each side of the door.
Step 2: Remove the cover, then carefully lift out the first glass panel. Place it on a cushioned surface, for example a tea towel.
Step 3: Lift and remove the second glass panel, and place on cushioned surface.
Step 4: Finally remove the third sheet of glass and place on a cushioned surface.
Step 5: Clean the panels as described below and allow them to dry completely before refitting
Cleaning the door and glass panels:
Use a clean, soft cloth with mild detergent or warm soapy water to remove grease and food residue.
Do not use abrasive cleaners, hard brushes, scouring pads, steel wool, knives or other materials that could scratch the glass.
For stubborn residue, only use a cleaning product permitted by your user manual and suitable for the surface.
Wipe away any cleaning product with a clean, damp cloth, then dry all parts thoroughly.
Please Note: After cleaning you may find some spots on the inner glass of the door. If this is the case, turn off the oven and wait until it cools down. Then, use kitchen paper or neutral detergent with a clean cloth to wipe up the inner glass.
How to reassemble and refit the oven door:
Make sure all parts are completely dry before reassembling the door.
Reassemble oven inner glass:
When reassembling the glass into the oven door, ensure the ‘PYRO’ mark on the corner is inserted inwards.
Step 1: Insert the third sheet of glass below the first support clip.
Step 2: Then insert the second sheet of glass between the first and second support clips.
Step 3: Finally insert the first sheet of glass into the third support clip.
Step 4: Check that each panel is correctly seated in its supports and that the glass clips are secure.
Step 5: Refit the cover and secure it with the two screws.
Reassembling the oven door:
Step 1: Hold both sides of the door firmly. Sliding at a 70-degree angle, back onto the hinges.
Step 2: Once the oven door is back on the hinges, ensure both clips are closed completely.
Step 3: Gently open and close the door to check that it is fitted correctly.
Thank you for your feedback!
Please answer all questions.