How do I use the control panel on my Laundry U washing machine?

Laundry U control panel
1 Power

Tap to turn the washing machine on and off.

 

  • If you do not use the control panel for 10 minutes after turning the washing machine on, it will turn itself off automatically.
  • This washing machine turns itself off after the washing cycle is complete.

Please note: you cannot tap the power button to turn the washing machine off while a cycle is in progress. You will need to pause the cycle first, then tap the power button to turn the washing machine off

2 Navigation dial

Turn the navigation dial to the left or right to navigate through the cycles and functions. As you turn the navigation dial the screen will display your selection.

3 Start / Pause

Tap and hold to start or pause the current operation.

4 Display

The display shows you information about the current cycle, the estimated time remaining, and will display an information message if a problem occurs.

5 OK

Tap to confirm your choice of function or setting.

6 Temp.

Tap to change the water temperature for your chosen cycle.

 

  • The indicator above the button shows the default or selected setting.
7 Rinse

Tap to change the rinse count for your chosen cycle.

 

  • The indicator above the button shows the default or selected setting.
8 Spin

Tap to change the spin speed for your chosen cycle.

 

  • The indicator above the button show the default or selected setting.
9 Additional function

Tap to open the additional functions menu.

 

Tap and hold for 3 seconds to open the system functions menu.

10 Smart Control

Tap to activate or deactivate the Smart Control function.

 

Tap and hold to enter pairing mode to connect to SmartThings.

 

  • When the Smart Control function is active, you can control your washing machine remotely using the SmartThings app on your smartphone or tablet.

Operating a cycle

Operating a cycle
1 Tap the power button (1) to turn on the washing machine
2 Turn the navigation dial (2) to select the cycle you want to use
3 Tap the Temp., Rinse and Spin buttons (3) to adjust the cycle settings
4 Tap the additional function button (4), then turn the navigation dial (2) to select additional functions.
5 Tap the OK button (5) to change the settings for your chosen additional function

Please note: not all cycles have additional functions available

6 Tap and hold the play / pause button (6) to begin the cycle Once the cycle has been set, the screen will display a description of the cycle, the maximum laundry load, and length of the cycle. You can also check the cycle progress, remaining cycle time, and information codes.

Thank you. Glad we were able to help. Your feedback helps us provide better support