How do I use the heating mode on my air conditioner?
Samsung air conditioning units offer instant heating capabilities, functioning both as an air conditioner during summer and a heater in winter, making them cost-effective. Activating the heating mode swiftly generates a warm environment. Initially, the fan may not operate for the first few minutes to prevent cold airflow until the unit warms up. If additional heating is needed, consider using another heating appliance alongside the air conditioner.
Note: The air conditioner gets heat energy from outside air and heats the room. Therefore, if the outside temperature is too low, the heating ability may decrease.
Step 1. Press the power button of the remote controller to turn on the air conditioner.
Step 2. Press the Mode button to set the operation mode. Each time the Mode button is pressed, the mode changes from Auto → Cool → Dry → Fan → Heat
Step 3. After selecting the mode, set the desired temperature.
Step 4. If necessary, set the fan speed with the buttons on the remote control.
Note:
- The actual design of the remote controller may differ from your model.
- This image is just a sample in English but is available in the language of your country.
When the outdoor temperature is low and the humidity is high, frost may develop on the outdoor heat exchanger, which may decrease the heating efficiency. When these conditions are present while Heat mode is on, the air conditioner runs the Defrost function for 5 to 12 minutes to remove frost from the outdoor heat exchanger.
Indoor unit will display the df indicator
When the Defrost function is on, the df indicator appears on the indoor unit display, steam is produced on the outdoor unit. Then, the air conditioner stops running to prevent cold air from coming out of the indoor unit.
Note: You cannot select other options with the remote control until the Defrost function is finished.
Note: Please call our contact center to get help with the issue. Our helpful agents will be there to help you.
Thank you for your feedback!
Please answer all questions.