What should I do when water does not flow from dispenser properly?

If you have problems with the water dispenser in your refrigerator, you can carry out the following troubleshooting guide before contacting a technical service, since the solution can be given with several steps. 

• When the water does not come out of the dispenser, check to see if the Child lock mode is turned on. If the Child lock is on, press and hold the Child lock button for more than 3 seconds to release. 
• If the dispenser is not locked, try to push the select button of Water, Cubed Ice, or Crushed Ice. In addition, make sure that you have selected the button to dispense water (Specific instructions may vary by model).
  
• The water tank may have frozen because the set temperature is too low. Try to change the set temperature a little warmer on the display.
  

The inside water filter connection may cause some problems. Find out if the inside water filter on your refrigerator is properly installed. If the water filter is not connected or inserted well, the water dispenser may not work. Make sure the water filter is locked in place properly. A clogged water filter is often a culprit of poor water pressure. You can also increase the water pressure by replacing the water filter in a timely manner.

• If you don't get any water from the water dispenser, you'll need to check the water line connection.
• Check that the outside water line is connected to the fridge properly. The water supply valve should be turned on. 
• Make sure the tube is free and clear of any obstruction. The water supply tube should not be kinked or crushed.
  
• Normally the water line and water supply valve are located on the back of the refrigerator near a sink.